Skip to main content

スケジューラーのプロパティ

グローバルスケジューラーのプロパティは、プロセス・レベルでプロパティを設定しない限り、すべてのプロセスに適用されます。グローバルスケジューラーのプロパティを使用して、外部ツールの最大実行時間を設定し、設定された実行時間を超えた後に外部ツールを停止し、スケジューラーがエラーを検出または正常に実行したときに電子メール警告を送信することができます。

[en] For more information see the following articles:

グローバル・スケジューラーのプロパティの設定

[en] Global settings set in the Scheduler module apply to all processes unless you have specifically chosen to override the global settings for a folder or schedule. You can use these global settings to configure email notifications when scheduled processes complete or fail, error handling behaviors, and maximum runtimes for external tools.

  1. スケジューラーのツールバーで、[設定]アイコンをクリックします。

  2. [プロパティ]タブでは、以下の設定のすべてまたは一部を選択できます。

    • [en] Send email when error occurs - sends an email to the specified email addresses when schedules or tasks complete with errors or fail.

    • [en] Send email when success occurs - sends an email to the specified email addresses when schedules or tasks completes successfully.

  3. [エラー処理]で、次の設定のすべてまたは一部を選択できます。

    • [en] Stop process when error occurs - stops the running the entire schedule if the Scheduler encounters an error while running a task. If this setting is not turned on, the Scheduler will skip the task and move on to the next one.

    • [en] Retry process when error occurs - retries to run the task after an error occurs. If you turn on this setting, you can also configure the number of retry attempts and the interval between attempts.

  4. [外部ツール]タブでは、以下の設定のすべてまたは一部を選択できます。

    1. [en] Type a value or use the up and down arrows in the Maximum run time field to set the time in seconds that the external tool can run.

    2. [en] Turn on the Stop on timeout toggle to stop the external tool from running after it exceeds the maximum run time.

    重要

    Incentivesクライアントと同じコンピュータで外部ツールが実行されていない場合、タイムアウト後に外部ツールを停止することは保証されません。

  5. [OK]をクリックします。

プロセスレベル・プロパティの設定

[en] When you configure global settings, these apply to all processes (schedules and folders) within the Scheduler module. You have the option to overwrite these settings for specific schedules or folders when needed. For example, there may be a specific schedule where you want to stop all processes if it encounters an error. You can overwrite the global settings, which in this example, allow the scheduled processes to continue, and configure settings at the schedule level to behave differently.

注記

[en] If you don't configure settings for folders and sub-folders within a schedule, they inherit the settings of the higher-level schedule or folder. If you don't configure settings for schedules, they inherit the global settings.

[en] Configuring settings at the schedule level

[en] You can choose to overwrite global settings and configure settings at the schedule level. All folders within this schedule inherit these settings, unless settings are configured at the folder level.

  1. [en] From the Scheduler module → All schedules pane, click the schedule you want to configure settings for.

  2. [en] Click the More options menu (...) and then click Edit.

  3. [en] Click the Settings tab.

  4. [en] Turn on the Overwrite global Scheduler settings toggle. This overwrites the settings set at the global Scheduer level and lets you configure settings for this specific schedule.

  5. [en] Under Email notifications, you can turn on all or some of these settings, and then provide the email addresses of the users you wish to notify. Separate multiple email addresses with a comma.

    • [en] Send email when error occurs - sends an email to the specified email addresses when schedules or tasks complete with errors or fail.

    • [en] Send email when success occurs - sends an email to the specified email addresses when schedules or tasks completes successfully.

  6. [en] Under Error handling, you can turn on all or some of these settings:

    • [en] Stop process when error occurs - stops the running the entire schedule if the Scheduler encounters an error while running a task. If this setting is not turned on, the Scheduler will skip the task and move on to the next one.

    • [en] Retry process when error occurs - retries to run the task after an error occurs. If you turn on this setting, you can also configure the number of retry attempts and the interval between attempts.

  7. [en] Under External tools, you can turn on the Set a maximum run time toggle to set a maximum time that the Scheduler allows an external tool to run.

    1. [en] Type a value or use the up and down arrows in the Maximum run time field to set the time in seconds that the external tool can run.

    2. [en] Turn on the Stop on timeout toggle to stop the external tool from running after it exceeds the maximum run time.

    重要

    [en] If the external tool is not running on the same computer as the Admin Client, stopping the external tool after the timeout is not guaranteed.

  8. [en] Click Save.

[en] Configuring settings at the folder level

[en] You can choose to overwrite global settings and configure settings and the folder level. This overwrites any settings configured globally or at the schedule level.

  1. [en] From the Scheduler module → All schedules pane, click the schedule that contains the folder you want to configure settings for.

  2. [en] Click the More options menu on the folder you want to configure settings for (...) and then click Edit.

  3. [en] Click the Settings tab.

  4. [en] Turn on the Overwrite global Scheduler settings toggle. This overwrites the settings set at the global Scheduer level and lets you configure settings for this specific schedule.

  5. [en] Under Email notifications, you can turn on all or some of these settings, and then provide the email addresses of the users you wish to notify. Separate multiple email addresses with a comma.

    • [en] Send email when error occurs - sends an email to the specified email addresses when schedules or tasks complete with errors or fail.

    • [en] Send email when success occurs - sends an email to the specified email addresses when schedules or tasks completes successfully.

  6. [en] Under Error handling, you can turn on all or some of these settings:

    • [en] Stop process when error occurs - stops the running the entire schedule if the Scheduler encounters an error while running a task. If this setting is not turned on, the Scheduler will skip the task and move on to the next one.

    • [en] Retry process when error occurs - retries to run the task after an error occurs. If you turn on this setting, you can also configure the number of retry attempts and the interval between attempts.

  7. [en] Under External tools, you can turn on the Set a maximum run time toggle to set a maximum time that the Scheduler allows an external tool to run.

    1. [en] Type a value or use the up and down arrows in the Maximum run time field to set the time in seconds that the external tool can run.

    2. [en] Turn on the Stop on timeout toggle to stop the external tool from running after it exceeds the maximum run time.

    重要

    [en] If the external tool is not running on the same computer as the Admin Client, stopping the external tool after the timeout is not guaranteed.

  8. [en] Click Save.

言語プロパティの設定

モデル言語を設定します。この設定は、スケジューラーとワークフローを通じて実行される発行物の日付と数値形式を変更します。

スケジューラープロセスに関連付けられている電子メールは、この設定の影響を受けます。

  1. [管理] → [その他のオプション]をクリックします。

  2. [一般]タブで、[モデル言語]リストから言語を選択します。

  3. [保存]をクリックします。

スケジューラーの電子メールを無効にする

スケジューラーのプロセスに関連付けられたすべての電子メールを無効にします。

  1. [管理] → [その他][オプション] → [一般]に移動します。

  2. クリア スケジューラのメール チェックボックス。

  3. クリック 保存。

チェックボックスをオフにすると、スケジュールが開始されたときや完了したときに電子メール通知が届かなくなります。